Usual Things To Anticipate During A Houston Fire Alarm Inspections
Most people know that flashing lights and noisy alarms are obvious warning signs. Many are introduced to this through fire drills while still students in school. It carries over to the professional workplace, as they need to know when and how to follow signals for evacuation, be they drills or reality. Given all this, fire alarm systems must be appropriately kept up. They also need routine inspections to that everyone in a building is kept safe.
Inspections and testing of fire alarms are crucial to making sure that all of your current alarms are in compliance with NFPA 72. At the time of writing, that’s the current version of the National Fire Alarm and Signaling Code. Such inspections can also find any parts of a fire signaling system within a structure that could use replacement, repairs, or upgrades.
Also, when the whole system is maintained appropriately, the business is able to keep themselves protected in the event of a fire. That’s because they can prove their installed systems were in alignment with the required fire protection standards of their insurance carrier.
Inspections of fire alarm systems are crucial to keeping building occupants safe, but they also maintain the integrity of any physical assets of the business too. What specifically happens when a fire alarm inspection is taking place?
Things You Should Know Regarding Fire Alarm Inspections
Inspecting fire alarms isn’t always a high priority for anyone operating their business. Then again, the little time and inconvenience involved pales in comparison to the possibility and ramifications of a system malfunctioning during a genuine emergency.
If you want to be really prepared for an inspection of a fire alarm system, then as a property manager you might be curious about the following:
- What transpires while the inspection is happening?
- Just how much time will this take?
- What should my employees know about?
- How frequently should this happen?
What Transpires During The Inspection & Testing?
The initial stage of any inspection happens prior to fire safety technicians arriving on the premises. They need to alert the local fire authorities about any tests they are going to conduct so there isn’t a false alarm.
Once there, these technicians conduct a number of tests to make sure that every system component is functioning properly, ranging from elevators and fire doors to strobes and fire alarm panels.
In particular, the following items usually undergo inspection and testing:
- Heat and smoke detectors
- Zones and annunicators
- Output relays/activations
- Low-pressure alarms, flow switches, and tamper switches
- Supervised control switches and valves
Going through all the proper testing means that NFPA conditions and requirements are satisfied. If not, possible problems which could hurt the system effectiveness are identified. Smoke detectors get cleaned, there is testing of heat-actuating devices, and all related devices get tagged as record-keeping requires.